English
English
| Quantity: | |
|---|---|
RCY-67220B
Giftforall
This wall-mounted hair dryer is developed for hotel guest rooms, serviced apartments, and other hospitality projects that require a fixed and easy-to-manage drying solution.
The unit combines a 1400W dryer with a fixed wall base, micro switch control and a 2.5m coiled handpiece cord. It is available only in a 220–240V configuration.
For project buyers, the main advantage is not a single cosmetic feature. The product can be configured around the required hotel installation method before production.
Specification | Product Details |
|---|---|
Product Type | Hotel wall-mounted hair dryer with micro switch |
Model | RCY-67220B |
Rated Power | 1400W |
Rated Voltage | 220–240V |
Speed Settings | 2 speeds |
Temperature Settings | 2 temperatures |
Air Speed | 15.6 m/s |
Control | Press-to-run micro switch |
Handpiece Cord | 2.5m coiled cord |
Mains Power Lead | 1.5m |
Housing Material | UV-resistant antibacterial ABS |
Product Size | 230 × 175 × 105 mm |
Installation | Plug-in or hardwired |
Cable Entry | Rear or side cable entry |
Terminal Block | Available for hardwired projects |
Plug Type | Configurable by destination market |
Cord Length | Can be adjusted for suitable project orders |
Exterior Color | Project-specific options available |
Sample Lead Time | About 3–5 days |
Bulk Production | About 25–35 days after configuration is confirmed |
We use a press-to-run micro switch on the dryer handpiece.
The dryer operates while the guest presses the switch and stops when the switch is released.
This control method is simple for hotel guests and makes the operating status clear during normal use.
For buyers comparing different hotel wall-mounted hair dryers, the micro switch is one of the main functional differences of this model.
The dryer provides:
2 speed settings and 2 temperature settings.
This gives hotel guests a simple level of control without adding unnecessary operating complexity.
The rated power is 1400W, with a working voltage of 220–240V.
These specifications should be confirmed against the electrical requirements of the destination market before ordering.
This RCY-67220B uses a 2.5m coiled handpiece cord as the standard configuration.
The longer handpiece cord gives guests more working range around the mirror and vanity while keeping the dryer connected to the fixed wall base.
The mains power lead is normally 1.5m.
These are two different cables:
Handpiece coiled cord: 2.5m
Mains power lead: 1.5m
For suitable project orders, we can adjust the cord length according to the bathroom layout and installation position.
The outer housing uses UV-resistant antibacterial ABS material.
This material is suitable for fixed hospitality applications where the product is installed for repeated use in guest bathrooms.
For hotel housekeeping and engineering teams, the fixed wall-mounted design also creates a consistent location for routine inspection and cleaning.
The page should describe this material as antibacterial ABS rather than making unsupported claims such as sterilizing or germ-killing.
The product can be manufactured in either plug-in or hardwired configuration according to the project.
For plug-in projects, the wall base can be supplied with a mains power lead and the required plug type.
The standard mains power lead is approximately 1.5m.
Plug configuration can be specified according to the destination market and project requirements.
If you need to compare different installation methods before choosing a configuration, see our plug-in vs hardwired wall-mounted hair dryers for hotels guide.
For hardwired projects, the unit can be configured for direct connection to the building-side power supply.
A terminal block can be added to support on-site electrical connection.
This is particularly relevant for hotel projects where the electrical supply has already been prepared inside or near the installation area.
The power connection can be configured with:
rear cable entry or side cable entry.
Rear entry allows the building-side cable to enter from behind the wall base.
Side entry can be used when the existing cable route does not match the rear entry position.
The required cable-entry method should be confirmed before production.
This model can be adjusted for different hotel and distributor projects before production.
Available project configurations can include plug-in or hardwired installation, rear or side cable entry, terminal block, plug type, mains power lead length, handpiece coiled cord length, and exterior color.
These are product configuration options rather than standard specifications for every order.
Final availability should be confirmed according to the required quantity and production requirements.
The product can be evaluated for both existing hotel renovation projects and new hotel installations.
For renovation projects, buyers should first confirm the existing installation position, electrical connection, cable-entry location, and available wall space.
For new projects, the installation configuration can be confirmed before production according to the electrical plan.
The product dimensions are:
230 × 175 × 105 mm
For hotel projects, overall product dimensions are only one part of the installation check.
If the project needs to reuse an existing wall position, the buyer should also confirm the wall-base area, fixing method, and cable-entry location before approving the final configuration.
Samples can normally be prepared in approximately 3–5 days.
For hotel renovation projects or first-time orders, buyers can use the sample to verify the actual product, installation position, cord reach, and electrical configuration before approving a larger order.
Q1: Is this hair dryer suitable for hotel use?
A: Yes, it is designed specifically for commercial use. It features a wall-mounted design, fireproof components, and a durable motor built to handle frequent use by guests.
Q2: Can the cord length be customized?
A: Yes, the standard cord length is 1.8 meters, and we offer customization options for longer cords to fit different bathroom layouts.
Q3: Can the cord length or product color be changed?
A: Yes. Handpiece cord length, mains power lead length, and exterior color can be adjusted for suitable project orders.
Q4: How does the negative ion function work?
A: It releases 10 million negative ions to neutralize static electricity in hair, reducing frizz and leaving hair smoother and shinier after drying.
Q5: Is the installation process difficult?
A: No, the wall-mounted base comes with mounting hardware, and installation is straightforward with basic tools. We also provide installation guides for bulk orders.
